[Blog](https://seaweedradar.com/blog/) · [Reading the risk](https://seaweedradar.com/blog/category/reading-the-risk/) · November 18, 2026 · 4 min read

# How a Stretch of Coast Gets Its Seaweed Risk Level

A coast's risk level comes from satellite data on floating seaweed within 50 to 100 km of each coastal pixel, compared with a multiday baseline and sorted into low, warning, medium or high.

The risk level on a beach page is a comparison, not a count of seaweed on the sand. It asks whether the floating seaweed near a coast is unusual against a recent baseline, and it answers with one of four words.

## How is a seaweed risk level worked out?

Each coastal pixel is checked against the floating seaweed in the water around it. The method uses satellite-derived floating algae data from the University of South Florida. For every pixel along the shore, it looks at the surrounding 50 to 100 km and compares what it finds with a multiday baseline. The difference between the two is what gets classified.

That's the whole idea, and it's worth holding onto. The level is about change against a baseline, and about water offshore. Seaweed far out at sea that has been there for days is part of the baseline. A fresh build-up near a coast stands out against it.

The public description leaves some things out. It gives no numeric cutoff for any level, no length for the baseline period, and no pixel size. Seaweed Radar doesn't state those numbers either, because it has no source for them. If you see a figure for them elsewhere, check where it comes from.

## What do low, warning, medium and high mean?

The comparison is sorted into four levels: low (blue), warning (yellow), medium (orange) and high (red). Black marks pixels where there was not enough data to say anything.

On Seaweed Radar each level always appears with its letter as well as its colour: L, W, M or H. That way the level still reads clearly in a screenshot, in grey, or for someone who cannot tell blue from green. The four words are explained in the [glossary](https://seaweedradar.com/glossary/).

Two things hold for all four levels. The source product is experimental, and it is not a forecast. It is refreshed daily and built from satellite images of floating seaweed collected over the previous week. A level is a statement about what the satellites saw recently, not a promise about tomorrow.

## Where does the floating seaweed data come from?

The floating seaweed data comes from the University of South Florida's satellite work on sargassum, which tracks floating algae from space. The map is a joint effort of NOAA's Atlantic Oceanographic and Meteorological Laboratory, NOAA CoastWatch and the university. Satellite data is drawn from NOAA, NASA and the Copernicus Programme.

Seaweed Radar measures nothing itself. It reads the published map every day and rewrites its pages when a new one arrives. How that works, step by step, is on the [how it works](https://seaweedradar.com/how-it-works/) page.

## Why do neighbouring beaches share a level?

A level covers a run of shoreline, not a single beach. These runs are usually 20 to 190 km each, and a whole run gets one level. Playa Delfines and Playa Tortugas in Cancún are 9 km apart, so they always get the same level on Seaweed Radar.

So two beaches can feel different on the same day and still show the same word. The level can't tell them apart, but the shape of the coast can. A beach facing the open sea tends to collect more drifting seaweed than one a few kilometres away that faces another way. That is a rule of thumb, not a measurement, and each beach page says which way the beach faces.

If you are weighing two places, [compare two beaches before you book](https://seaweedradar.com/blog/compare-two-beaches-seaweed-radar-before-you-book/) shows how to read their records side by side. For the exposure question, see [whether sheltered beaches get less seaweed](https://seaweedradar.com/blog/do-sheltered-beaches-get-less-seaweed/).

## What does the level not tell you?

It won't tell you what the sand looks like this morning. The level describes seaweed offshore that could arrive. It says nothing about whether a hotel raked the beach at six, or whether the wind pushed yesterday's mat past the point.

It also runs behind the calendar. The map lags by one to two days, so every page shows the date of the map it quotes. When you read a level, read its date first.

Nor does it look ahead. Because the product is not a forecast, the useful question is how much notice any of this gives you. [How many days of warning a seaweed forecast gives](https://seaweedradar.com/blog/how-many-days-warning-seaweed-forecast/) goes through that.

## How do you read a level on a beach page?

Start with the date, then the level and its letter, then the recent record. Each page shows the last fourteen days and a monthly count back as far as daily maps exist. A day with no published map is counted as missing, never as low, so a gap does not make a beach look better than it was.

To see how often a coast has sat at each level, open a by-month page such as [Cancún by month](https://seaweedradar.com/cancun/by-month/). The article on [days at each level on a by-month page](https://seaweedradar.com/blog/how-to-read-by-month-seaweed-page-days-at-each-level/) explains the counts. Check the beach or destination you are heading to on Seaweed Radar before you go, and again closer to your dates.

## Bottom line

A coast's risk level is a daily comparison of floating seaweed within 50 to 100 km against a multiday baseline, sorted into low, warning, medium or high and given to a whole run of shoreline. It describes the water offshore, it is dated and a day or two old, and it is not a forecast. Read it with its date and the recent record, and treat it as one input for your trip rather than a verdict on one beach.

## Questions

**How is the seaweed risk level for a coast calculated?**

For each coastal pixel, the method looks at satellite-derived floating seaweed data from the University of South Florida in the surrounding 50 to 100 km and compares it with a multiday baseline. The difference is sorted into low, warning, medium or high.

**Is the risk level a forecast?**

No. NOAA calls the product experimental and says it is not a forecast. It describes seaweed offshore that could arrive, and it is refreshed daily.

**What does a missing day mean?**

Black on the source map means insufficient data. On Seaweed Radar, a day with no published map is counted as missing, never as low.

**Why do two beaches near each other show the same level?**

The level is given to a whole run of coast, usually 20 to 190 km long, so beaches a few kilometres apart normally share it.

## Sources

- [NOAA CoastWatch Caribbean and Gulf of America Regional Node: Daily Sargassum Inundation Risk (SIR v1.5)](https://cwcgom.aoml.noaa.gov/SIR/)
- [NOAA AOML: Daily Sargassum Inundation Risk (SIR v1.5)](https://www.aoml.noaa.gov/phod/sargassum_inundation_report/)
- [USF Optical Oceanography Lab: Sargassum Watch System](https://optics.marine.usf.edu/projects/SaWS.html)

Tags: [risk-levels](https://seaweedradar.com/blog/tag/risk-levels/), [satellite-data](https://seaweedradar.com/blog/tag/satellite-data/), how-it-works, baseline

See the newest risk level for [399 beaches](https://seaweedradar.com/), or read [how the levels work](https://seaweedradar.com/how-it-works/).

## Morning report

The seaweed risk for your beach, by email at 7 AM local time, in English or Spanish. Each report gives the newest risk level for the coast around the beach: not a view of the sand, not a forecast.

- Every morning
- Once a week
- One weekend

[Choose a plan](https://seaweedradar.com/report/)

Trip Brief PDF with every plan. Payment on Gumroad.
