Blog · Reading the risk · · 5 min read
What a Black Stretch on the Seaweed Risk Map Means
Black on the satellite seaweed risk map means there was not enough data to give that stretch of coast a level. It is not low risk, and it says nothing about whether seaweed is there.
A black stretch is a gap in the data, and a gap is not good news. Before you plan a day around the map, know which colors are readings and which are missing information.
What does black mean on the risk map?
Black means "insufficient data": the satellite information was not enough to give that stretch of coast a level. The map's own legend puts it outside the scale, next to the four colors that do carry a reading.
Those four are low (blue), warning (yellow), medium (orange) and high (red). Each one is a judgement about how much floating seaweed is nearby compared with a recent baseline. Black is the absence of that judgement. The agency that publishes the map defines it in one line and does not give the reason for any particular stretch.
Is black the same as low?
No. Low is a result: the data were there, and they pointed to little seaweed offshore. Black is a non-result: the data were not there. Read black as "probably fine" and you've turned a blank into a promise the map never made.
| Color | What it says | What it does not say |
|---|---|---|
| Blue (low) | Little floating seaweed nearby in the satellite data | That the sand is empty today |
| Yellow (warning) | More than low, short of medium | When or whether it lands |
| Orange (medium) | A meaningful amount nearby | How much reaches a given beach |
| Red (high) | The most seaweed nearby | That a beach is unusable |
| Black | No level could be given | Anything about seaweed, either way |
Even a blue level is not a promise of a clean beach; a low level does not mean an empty beach. Black is weaker still, because there is no level to hold onto at all.
Why would a stretch of coast have no data?
The map does not say why a given stretch is black, so the honest answer is that nobody reading it can know. What can be said comes from how the levels are made.
For each coastal pixel, the method looks at satellite floating-seaweed data in the surrounding 50 to 100 km and compares it with a multiday baseline. If there is not enough usable data in that neighbourhood, there is nothing to compare, and the pixel stays black.
Satellite detection has documented limits that could produce such gaps. The CARICOOS description of the floating algae index says it saturates under sun glint, clouds or thick aerosols, and that this reduces its coverage. The University of South Florida's description of its detection system notes that the sensors revisit at different rates, from near-daily to every 16 days, and that higher-resolution satellites typically cover smaller areas around coasts and do not provide daily coverage.
So cloud, glint, haze and gaps in coverage are plausible reasons. None is a confirmed cause for any particular black stretch, and the map doesn't say which one applies.
How is a colored level worked out?
Each colored level comes from the same method: satellite data on floating seaweed, compared with a baseline, for a run of coast. If you want the steps, how a stretch of coast gets its risk level walks through them.
Three things hold for every color, and for black too:
- The product is experimental and updated daily.
- It is not a forecast. It estimates the potential for seaweed to wash ashore, which is different from saying seaweed will arrive.
- Whether seaweed actually reaches a beach depends on winds, tides and regional ocean circulation, which satellite data alone cannot settle for one beach.
What should you do when the stretch you care about is black?
Start with the date. A level always belongs to a day, and a black stretch on one day often sits next to colored days on others, so the nearby record is the best clue to what the satellites were able to see.
Then widen the view. Look at the stretches of coast on either side, because a level covers a long run of shoreline and its neighbours show what is happening in the same water. Treat that as context, not as a substitute: a neighbour's color is not the black stretch's color.
Last, keep the decision small. Black is a good reason to hold a plan loosely, to check again the next day, and to ask your hotel or local operator what the beach looks like this week. It is not a reason to cancel on its own, and it is not a reason to assume there is no seaweed.
How do you check a coast on Seaweed Radar?
Seaweed Radar repeats the daily satellite-based risk level for the coast around about twenty beaches, using the same four levels. A level covers a run of coast between 20 and 190 km long, not a single beach, and it describes seaweed offshore that could arrive, not the sand itself. The data runs one to two days behind, and the record goes back to July 2025. How Seaweed Radar shows the risk level explains each of these points, and the glossary defines the terms used here.
Each beach page also says which way the beach faces, which matters for where seaweed collects, so a black day on one coast does not tell you about a beach facing the other way. For a place like Cancún, open the destination page, pick the beach you are considering and read the level together with its date.
If a stretch has no level for a day, do not fill the gap with a guess. Look at the days on either side in the record, and treat the missing day as unknown. A run of black days is a reason to be cautious about planning around the map, not a reason to relax.
Bottom line
Black means no level, so it is an unknown rather than a low. Keep it separate from blue, check the days around it, and remember that none of the colors is a forecast or a statement about the sand.
Questions
- What does black mean on the seaweed risk map?
- Black means there was not enough satellite data to give that stretch of coast a level. It is not a low, medium, warning or high reading; it sits outside the scale.
- Does black mean there is no seaweed?
- No. It means no level could be worked out, so the map says nothing either way. Seaweed may or may not be offshore or on the sand.
- Why is a stretch of coast black?
- The agency that makes the map does not say why for any particular stretch. Clouds, sun glint and thick haze are documented limits for satellite seaweed detection, so they are a possible reason, not a confirmed one.
- Is the risk map a forecast?
- No. It is an experimental, daily, satellite-based estimate of the potential for seaweed to wash ashore, and it is not a forecast.
Sources
- NOAA CoastWatch Caribbean and Gulf of America Regional Node: Daily Sargassum Inundation Risk (SIR v1.5)
- University of South Florida Optical Oceanography Lab: Sargassum Watch System
- CARICOOS: Floating Algae Index (Sargasso)
Tags: risk-level, black-no-data, satellite-data, reading-the-map, inundation-risk
See the newest risk level for 399 beaches, or read how the levels work.