Satellite data from · the site updates once a day

Blog · Reading the risk · · 4 min read

A High Seaweed Risk Level Today: What It Does and Does Not Say About Your Beach

A high risk level means satellites found a lot of floating seaweed in the water off that coast, and landings are likely along much of it. It does not describe the sand at one beach today.

A red "high" on your phone feels like a verdict on your beach. It is a verdict on the water offshore, and the gap between the two is where most of the confusion starts.

What do the four levels mean?

There are four levels, lowest first: low, warning, medium and high. On Seaweed Radar they carry the letters L, W, M and H, and on the satellite map they are blue, yellow, orange and red. Black means there was not enough data to score that coast.

The glossary puts it plainly. Low means the satellites found little floating sargassum off that coast. High means they found a lot, and landings are likely along much of it.

Notice the wording. "Likely" and "off that coast" carry weight. The level is about odds and about water, not about a particular stretch of sand.

What does the level actually measure?

It measures floating seaweed in open water. For every coastal point, the method looks at satellite data on floating algae in the surrounding 50 to 100 km and compares it with a baseline from the previous days. The bigger the difference, the higher the level. The picture is built from about a week of satellite images.

The agency that publishes the map labels it experimental and says outright that it is not a forecast. It rates how likely it is that seaweed floating near a coast washes ashore. It does not record whether that happened, which is why what an inundation event is matters when you read the news about one.

There is a built-in blind spot too. Satellites see floating mats best in open water. In the last stretch before the sand, the land muddles the image, so seaweed close in is the hardest to see from space. A level can be quiet while a thin band sits right at the waterline.

Why does one level cover so many beaches?

The shoreline is scored in runs, usually 20 to 190 km long, and a whole run gets one level. Two beaches in the same run get the same level whatever they look like.

Playa Delfines and Playa Tortugas in Cancún are 9 km apart and sit in the same run, so they always show the same level on Seaweed Radar. One can be raked and open to the swell while the other is piled with brown weed. Why two beaches can share one level goes through how that works.

What can a high level not tell you?

A lot. It says nothing about:

  • Whether a hotel raked the sand at six this morning.
  • Whether the wind pushed yesterday's mat past your stretch of coast.
  • How the beach faces. As a rule of thumb, a beach that faces away from the wind and swell often collects less than one a few kilometres off that faces into it. Not every time, though. Which way a coast faces often matters more than the island's name.
  • Anything that is not seaweed. Red tide and brown tide are not sargassum, and the map does not measure them.

It also says nothing about the future. A high level today is not a promise about next week, and a low one is not a promise of anything.

Does high mean the same thing in every place?

The four words are the same everywhere, but each level is relative to the surrounding water and a recent baseline, so it says how a coast looks compared with its own recent picture. It does not translate into a fixed amount of seaweed on the sand. A high level on one coast and a high level on another tell you that satellites flagged both, not that the two beaches will look alike.

That is also why a level is best read as one input. The daily record on a beach page, which shows how its level has moved over recent days, tells you more than a single colour.

How old is the number you are reading?

Older than it looks. The map runs one to two days behind the calendar. Seaweed Radar checks for a new one twice each afternoon (UTC) and rewrites its pages when it arrives. Every page shows the date of the map it is quoting, and if a day is skipped, the page keeps the last map and says how old it is.

So "today" on a level means "the last satellite picture available." Look at the data date before you read the colour. A high level from three days ago is a weaker signal than one from yesterday.

How should you use a high level?

Treat it as a reason to look closer, not a reason to cancel. A few steps help:

  1. Check the data date, and the level for the days before it. A single high day and a week of high are different situations.
  2. Look up your beach on Seaweed Radar and note which way it faces. For the Cancún example above, start with the Playa Delfines page; the how it works page explains what each line on it means.
  3. If you are booked at a hotel, ask the hotel about raking and what happens on a heavy morning.
  4. Check again closer to your dates. The level moves.

Bottom line

A high level says satellites found a lot of floating seaweed off that coast, and landings are likely along much of it. It does not say what your sand looks like today, and it is not a forecast. Use it with the data date and the way your beach faces, not on its own.

Questions

Does a high risk level mean my beach is covered in seaweed?
Not necessarily. High means satellites found a lot of floating sargassum off that stretch of coast and landings are likely along much of it. It does not describe the sand at one beach today, which depends on wind, the way the beach faces and whether it was raked.
Does a low level mean a clean beach?
No. Low means little floating seaweed was found offshore. Seaweed already on the sand, or close in where satellites see poorly, may not show in the level.
Is the risk level a forecast?
No. The agency that publishes the map calls it experimental and says it is not a forecast. It describes the most recent satellite picture.
How old is the level I am looking at?
The underlying map runs one to two days behind the calendar, and every page on Seaweed Radar shows the date of the data it quotes.

Sources

Tags: risk-levels, satellite-data, reading-the-risk, offshore-seaweed, beach-planning

See the newest risk level for 399 beaches, or read how the levels work.