Blog · Reading the risk · · 4 min read
Which Satellites Watch Sargassum? MODIS, VIIRS and OLCI Explained
Three sensors do most of the watching: MODIS on NASA's Terra and Aqua, VIIRS on NOAA-20, and OLCI on Sentinel-3. Agencies combine them, because each one fills gaps the others leave. What they see is seaweed in the water, not on the sand.
No single satellite does the job alone. The risk level on a beach page rests on several sensors whose pictures are stitched together, and each has a different strength. Knowing which is which makes it easier to see what a level can and cannot tell you.
How does a satellite see floating seaweed?
By the sunlight it reflects. NASA's Earth Observatory explains that sargassum reflects more near-infrared light than water does, because of its plant structure and chlorophyll pigments. Scientists flag the pixels where the reflectance rises above what plain seawater gives, then use the strength of that rise to estimate density, meaning the fraction of the ocean surface the seaweed covers in each pixel. Density can then be converted into biomass, the total weight of seaweed in a pixel.
That's the whole trick, and it explains the limits. It is also why the word "detect" can mislead: the satellite measures reflected light, and people turn that measurement into an estimate of seaweed. A satellite sees the top of the water in sunlight, so it sees seaweed that floats, in daylight, where nothing hides the sea. If you want the term for what happens when that seaweed reaches a coast, see what a sargassum inundation event is.
What does MODIS add?
Length of record. NASA's page names MODIS on the Terra and Aqua satellites as the long-running source, with a record that starts in March 2000. That history is why scientists can say that one year was bigger than another.
NOAA's FAQ from 2023 said the University of South Florida estimated sargassum density using MODIS data. It also said MODIS was nearing the end of its mission, and that agencies planned to add VIIRS, OLCI and the Sentinel-2 imager. An older instrument still carries much of the history, and newer ones are taking on more of the daily work. For a traveller, the practical effect is that the record behind a level stretches back years, while the instruments feeding it today are changing.
What do VIIRS, OLCI and Sentinel-2 add?
Each covers a different need. NOAA's own announcement from January 2024 describes it this way:
| Sensor | Satellite | What NOAA or NASA says it is good for |
|---|---|---|
| VIIRS | NOAA-20 | Daily global coverage, useful for tracking large mats in the open ocean |
| OLCI | Sentinel-3 | Part of the combined composites that fill gaps and sharpen the picture |
| Sentinel-2 imager | Sentinel-2 | Detailed imagery of smaller blooms closer to shore |
| OCI | PACE | Newer; feeds the Sargassum Watch System's daily and weekly composites |
The pages we read give no pixel sizes or revisit times for these instruments, so we don't quote any. What they do say is that the sensors differ in how much of the sea they cover and how finely they see it.
PACE's OCI is the newest. A 2024 study led by Lin Qi, described by NASA, found that OCI observes more of the ocean and detects sargassum with greater sensitivity. Because it measures many colours of light, the authors also found it could tell sargassum apart from a different organism, Trichodesmium, which other sensors can confuse with it.
Why are the sensors combined?
Because any one sensor leaves holes. NOAA's illustration for August 2, 2022 shows images from NOAA-20 VIIRS, Terra MODIS and a composite of Sentinel-3 OLCI, NOAA-20 VIIRS and Terra MODIS, and says combining sensors fills gaps and improves spatial resolution.
For you, the point is the date, not the instruments. A level is built from images gathered over days, and Seaweed Radar's pages note the data runs one to two days behind. If you wonder how quickly a level can move, see how often the risk level changes.
What can a satellite not tell you?
Plenty. Four limits matter most when you read a level:
- Cloud hides the sea. Where cloud covers the water, there is nothing to measure. What happens to the map on cloudy days explains how the gaps are handled.
- A high reading is not always seaweed. NOAA's example is a coastal index map where high values in lagoons near Cape Canaveral were not sargassum but coastal eutrophic water, meaning water rich in nutrients. Scientists check these cases against other information; someone looking at a single pixel can't. It is one reason the level is described as a risk, not a count of seaweed on a beach.
- It is offshore, not the sand. A level describes seaweed in the water that could arrive. It does not say what is on a particular beach today.
- It is not a forecast. NOAA's inundation report is not a forecast, and the product is experimental. What experimental means on the risk map covers it in full.
Where do you check the level for your beach?
On Seaweed Radar, on the page for the beach or coast you are heading to, such as Cancún or Punta Cana. The page shows the level, the date of the data, and the recent days around it. A level covers a run of coast 20 to 190 km long, so read it as the risk for that stretch, not for one beach. How it works lays out the details.
Bottom line
MODIS gives the long record, VIIRS gives daily coverage of large mats, OLCI and Sentinel-2 add detail, and PACE's OCI is the newest addition. They are combined because each leaves gaps the others fill. Read a level as a satellite-based risk for seaweed offshore, check the data date first, and remember it is not a forecast.
Questions
- Which satellites detect sargassum?
- MODIS on NASA's Terra and Aqua, VIIRS on NOAA-20, OLCI on Sentinel-3 and the imager on Sentinel-2 all appear in NASA and NOAA material, and NASA's PACE satellite now adds its OCI instrument. They are usually used together, not one at a time.
- Can a satellite see seaweed on the sand?
- The agency pages describe finding sargassum in the water from the sunlight it reflects. They do not describe measuring seaweed lying on a beach. A level on Seaweed Radar describes seaweed offshore that could arrive.
- Why are several sensors combined?
- NOAA says combining sensors fills gaps and improves spatial resolution. Its own FAQ also noted that MODIS was nearing the end of its mission, which is one reason to add other instruments.
- Is the satellite picture a forecast?
- No. NOAA says its inundation report is not a forecast, and Seaweed Radar does not forecast either. It shows a satellite-based risk level for a run of coast, with the date of the data.
Sources
- NASA Earth Observatory: Sizing Up the Sargassum Belt
- NOAA NESDIS: Orbiting Insights, Transforming Sargassum Seaweed Detection and Monitoring From Space
- NOAA CoastWatch: Sargassum FAQ
- Seaweed Radar: How Seaweed Radar works
Tags: satellite-data, modis, viirs, olci, risk-level
See the newest risk level for 399 beaches, or read how the levels work.